Your single point of reference for all your Geotechnical Inquiries

[Load Cells] Equipment

Total Items found:
<p>The load sensing element is a spool of high strength heat-treated steel or aluminum that withstands rough handling and loading. Electrical resistance strain gauges are bonded to the periphery of the spool. The gauges are mounted in a full bridge configuration ...
<p>Electrical resistance anchor load cell consists of a ring-shaped stainless steel body which incorporates from 8 to 16 electrical resistance strain gauges in full bridge configuration.<br>Typical applications include performance testing of anchor systems ...
<p>The Geosense® HLC-6000 series Hydraulic Anchor Load Cells consist of a sensitive pressure pad formed by joining two stiff steel discs at their periphery. The void inside the cell is filled with de-aired fluid. When load is applied to the cell the pressure ...
<p>The HYDLO consists of a sealed cell composed of two plates welded together around the periphery and filled with de-aired oil. The cell is directly connected to a pressure gauge (scale in kPa). The load applied to the cell induces an oil pressure variation, ...
<p>The Model 4910 Instrumented Rockbolt comprises a vibrating wire strain gage located inside a short length of standard threaded rockbolt or rebar. This short length is then connected via a coupling to a longer length of the same bolt material. The instrumented ...
These high performance cells have been specially designed to meet the stringent requirement of EN ISO and ASTM standards, for calibration of compression testing machines.
<p>The Model 3000 Load Cell is made from an annulus of high-strength steel or aluminum, with electrical resistance strain gages in a Wheatstone Bridge configuration. The load cell is designed primarily for use on tiebacks and rockbolts, although they may be ...
<p>The Model 4900 Vibrating Wire Load Cell consists of a cylinder of high-strength steel with 3, 4 or 6 vibrating wire strain gages located around the circumference of the cell. Loads applied to the cell are measured by the vibrating wire strain gages. The ...
<p>Measuring Anchors are a combination of a rock bolt and an extensometer and are used to determine the load exerted on rock bolts. They consist of a hollow anchor body, the sectional area and material of which corresponds to that of the rock anchor being ...
<p>NPC-3000 Series NATM Pressure cells are designed to monitor radial and tangential stresses of shotcrete in the construction of tunnels, particularly those using the New Austrian Tunnel Method and other underground works. The cells are constructed from two ...