Your single point of reference for all your Geotechnical Inquiries
Publications by [Boulanger R. W.]
Total Items found:
Ashford S. A.
,
Boulanger R. W.
et al.
<p>This Geotechnical Quick Report is written primarily for engineers and geologists interested in the effects of this massive earthquake on the built environment, US investigators planning field surveys, and researchers preparing RAPID proposals to NSF for ...
Filed under:
Earthquake Engineering -
Seismic Hazard Analysis
Reference:
GEER Association Report No. GEER-025a
<p>The purpose of the study described herein was to develop rational guidelines and analytical procedures for evaluating the potential for liquefaction or cyclic failure of low-plasticity silts and clays during earthquake loading.</p>
Filed under:
Earthquake Engineering -
Liquefaction
Reference:
"REPORT NO. UCD/CGM-04/01 Center for Geotechnical Modeling Department of Civil & Environmental Engineering University of California"
<p>In this paper is presented a critical re-evaluation of the factors CN and K using a relative state parameter index R. This paper expands upon the recent theoretical developments and presents relations that facilitate their implementation in engineering ...
Filed under:
Earthquake Engineering -
Liquefaction
Reference:
11th International Conference on Soil Dynamics and Earthquake Engineering, and 3rd International Conference on Earthquake Geotechnical Engineering, D. Doolin et al., eds., Stallion Press, Vol. 2, 484-491
Boulanger R. W.
,
Kutter B. L.
et al.
<p>This research project addressed key needs for advancing the design of pile foundations in soil profiles that are susceptible to liquefaction and lateral spreading during earthquakes. A series of large-scale dynamic centrifuge model tests were performed ...
Filed under:
Soil Mechanics -
Centrifuge Modeling
Reference:
