Your single point of reference for all your Geotechnical Inquiries

Geotechnical Design Software

A high variety of geotechnical software can be found in this category. Geotechnical software is defined as software designed especially in order to deal with geotechnical issues such as slope stability, seismic analysis, foundations, e.t.c.

Total Items found:
Geo Wall Software
Software by  CDM DOLMEN  
<p>IS Muri is a software designed for the calculation and verification of gravity, semi-gravity and cantilever retaining walls, with counterforts or keys.<br />The wall can be characterized by the presence of piles, micropiles, tiebacks (active and passive); ...
GEO5 - Pile Group
Software by  Fine Civil Engineering  
<p>This program is used to analyze a pile group (pile raft foundation with a rigid pile cap) using both spring method (FEM), or analytical solutions. Both floating piles and piles fixed into subsoil can be considered.</p>
GEO5 - Spread Footing
Software by  Fine Civil Engineering  
<p>This program is used for the design of spread footings subject to general load. It computes vertical and horizontal bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear reinforcement (punching).</p>
GEO5 Anti-Slide Pile
Software by  Fine Civil Engineering  
<p>This program is used for design of pile walls stabilizing slope movement or increasing safety factor of the slope. The first analysis should be done in the Slope Stability program, where the active and passive forces acting on pile wall are computed. Next, ...
GEO5 Beam
Software by  Fine Civil Engineering  
<p>This program provides the analysis of foundation beams resting on elastic subsoil.</p>
GEO5 Cantilever Wall
Software by  Fine Civil Engineering  
<p>This program is used to verify cantilever wall design. It offers a number of wall shapes and analyzes reinforced concrete cross-sections.</p>
GEO5 Earth Pressures
Software by  Fine Civil Engineering  
<p>This program computes basic earth pressures (active pressure, passive pressure, and pressure at rest) acting upon an arbitrary shaped structure.</p>
GEO5 Gabion
Software by  Fine Civil Engineering  
<p>This program is used for analysis of gabions. It allows analysis of any structure shapes including overhangs requiring anchoring.</p>
GEO5 Gravity Wall
Software by  Fine Civil Engineering  
<p>This program is used for analysis of gravity walls. It offers a range of wall shapes and verifies mass concrete cross-sections.</p>
GEO5 Masonry Wall
Software by  Fine Civil Engineering  
<p>This program is used for design and analysis of reinforced masonry block wall according to various standards.</p>