Your single point of reference for all your Geotechnical Inquiries

Equipment

Laboratory Testing
Find information for laboratory testing equipment. Browse our large database of laboratory apparatuses. Find quickly laboratory equipment and manufactures just be selecting a type of laboratory testing. Navigate easily to the manufacturer of any equipment.
Equipment Types:
Index Properties x 76  Shear Strength x 58  Cement compression x 22  Consolidation x 18  Compaction x 16  CBR x 12  Permeability x 10  Cement compaction x 8  Abrasion x 7  Moulds x 6  Flakiness x 5  ...show more
Total Items found:
CBR Mould and Accessories
CBR Mould, CBR Extension Collar, CBR Solid Base Plate, CBR Perforated Base Plate, Plated steel 150mm diameter x 120mm body height CBR Perforated Base Plate, Plated steel 6 in. (152.4mm) diameter x 7in (177.8mm) body height, Cutting Collar, Annular Surcharge ...
CBR Testing
The California Bearing Ratio (CBR) test is a penetration test for evaluation of the load-bearing capacity of soils used for building roads.The csCBR module fully supports this test type and VJ Tech Supplies all Testing Equipment, accessories and consumables ...
CBR TESTING MACHINES
<p>Used to load the penetration piston into the soil sample at a constant rate of 1,27 mm/min (1 mm/min to BS Spec.), and to measure the applied loads and piston's penetrations at determined intervals</p>
CBR/LBR Specific Load Frame (H-4156MA)
<p>The H-4156MA load frame has been designed as a low-cost solution to doing CBR testing. It features one-speed operation with a preset speed specifically for CBR tests. The CBR speed is set at 0.050 inches/minute (1.27 mm/minute), ASTM D1883. Maximum piston ...
Cement Compression and Flexural Machine
<p>The Cement Compression and Flexural Machine 25/250 KN is Fully Automatic and has been designed for testing the compression on the 50x50x50 mm cube moulds, 40x40mm and the flexural on the 40.1x40 x160 mm prism moulds <br>according to the related standards. ...
Filed under: Laboratory Testing -  Cement
CEMENT FLOW TABLE
<p>There are two models of the Cement Flow Table, Both are used for determining the consistency of mortar, lime and cement specimens.<br>The Manual hand operated model is fitted with a hand wheel. While the motor operated model is driven by a motor speed reducer ...
Filed under: Laboratory Testing -  Cement
Cement Shrinkage Test
The Cement Shrinkage Test is used to determine the accelerated soundness (autoclave method) and length changes of 40x40x160 mm and other sizes of cement prisms.
Filed under: Laboratory Testing -  Cement
Centrifuge Extractor
<p>The centrifuge extractor is used for the determination of bitumen percentage in bituminous mixtures.</p>
Chapman flask
Used for determining the amount of surface moisture in fine aggregate. The flask is graduated to 200 ml between the two bulbs and from 375 to 450 ml above the second bulb.
CHLORIDE CONTENT, RAPID METHOD
<p>Used to estimate the chloride content of aqueous solutions in sand and fine aggregates</p>