Your single point of reference for all your Geotechnical Inquiries

Publications in

Earthquake Engineering

Earthquake engineering is defined as the scientific branch devoted to the protection of society from earthquake hazards. More specifically earthquake engineering is defined as the behavior study of structures and geostructures during and after an earthquake. Geotechpedia provides a plethora of papers concerning earthquake engineering.

Total Items found:
<p>Analysis of light detection and ranging (lidar) derived topography combined with field data enables measurement of small (&lt;30 m), previously unrecognized dextral offsets beneath dense temperate rainforest along New Zealand&rsquo;s central Alpine fault. ...
Reference: GEOLOGY, May 2014; v. 42; no. 5; p. 411–414
<p>The paper introduces a novel approach for modeling nonlinear hysteretic behavior of reinforced concrete structures in the complex frequency domain. The new approach can be used to perform fast and accurate nonlinear SSI analyses, including sophisticated ...
Reference: Second European Conference on Earthquake Engineering and Seismology, Istanbul Aug. 25-29, 2014
<p>The previously unknown Greendale Fault ruptured in the September 2010 moment magnitude (Mw) 7.1 Darfield Earthquake. Surface rupture fracture patterns and displacements along the fault were measured with high precision using real time kinematic (RTK) GPS, ...
Reference: Tectonophysics 637 (2014) 178–190
<p>The pounding between adjacent buildings can cause both architectural and structural damages. The paper presents some aspects related to the Vrancea seismic motions pattern, a review of observed damages after a strong earthquake due to pounding of buildings ...
Reference: Second European Conference on Earthquake Engineering and Seismology, Istanbul Aug. 25-29, 2014
<p>The design of retaining walls requires the complete knowledge of the earth pressure distribution behind the wall. Due to the complex soil-structure effect, the estimation of earth pressure is not an easy task; even in the static case. The problem becomes ...
Reference: 8th Australasian Congress on Applied Mechanics, ACAM 8, 23-26 November 2014, Melbourne, Australia
<p>Turkey, being located in a highly seismically active region, has experienced several devastating earthquakes throughout its history. The recent Mw 7.4 1999 Kocaeli and Mw 7.2 2011 Van earthquakes caused a considerable amount of economical losses and physical ...
Reference: Second European Conference on Earthquake Engineering and Seismology, Istanbul Aug. 25-29, 2014
<p>Bounded by the western and eastern syntaxes, the Himalayan region has experienced at least five M~8 earthquakes during a seismically very active phase from 1897 through 1952. However, there has been a paucity of M~8 earthquakes since 1952. Examining of ...
Reference: Gondwana Research 25 (2014) 204–213
<p>The study of liquefaction potential of a place is of utmost importance regarding the safety of both life andproperty. Liquefaction of soil followed by earthquakes has always been a source of danger for the people living in the highly vulnerable seismic ...
Reference: International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 5, May 20141
<p>A site in Ch&acirc;teauguay, south of Montr&eacute;al, Qu&eacute;bec, Canada, was investigated as part of the design of a significant infrastructure project. A loose marine silt layer present at the site was found to be susceptible to liquefaction using ...
Reference: Second European Conference on Earthquake Engineering and Seismology, Istanbul Aug. 25-29, 2014
<p>Dynamic triggering of earthquakes by seismic waves is a robustly observed phenomenon with well-documented examples from over 30 major earthquakes. We are now in a position to use dynamic triggering as a natural experiment to probe the reaction of faults ...
Reference: Annu. Rev. Earth Planet. Sci. 2014.42:317-339