Your single point of reference for all your Geotechnical Inquiries
Publications in [Codes and Standards] format
Total Items found:
Allen T.
,
Nowak A. S.
et al.
The purpose of this Circular is to assist both structural and geotechnical engineers to better understand the calibration process and what information is required to perform such calibrations. The Circular describes how such calibration efforts need to be ...
Filed under:
Codes and Standards -
USA
Reference:
TRANSPORTATION RESEARCH CIRCULAR E-C079
Closure of underground mine openings by filling, plugging, capping, installing barriers, gating or fencing.
Filed under:
Mining Engineering -
Mine Design
Reference:
CODE 457, NATURAL RESOURCES CONSERVATION SERVICE CONSERVATION PRACTICE STANDARD
<p>National Annex for Cyprus of Eurocode 7.</p>
Filed under:
Codes and Standards -
Eurocodes
Reference:
Cyprus National Annex NA to CYS EN 1997-1:2004
<p>This document (EN 1997-1) has been prepared by Technical Committee CEN/TC250 “Structural Eurocodes”, the secretariat of which is held by BSI. CEN/TC 250 is responsible for all Structural Eurocodes. This document supersedes ENV 1997-1:1994.</p ...
Filed under:
Codes and Standards -
Eurocodes
Reference:
BRITISH STANDARD, BS EN 1997-1:2004
Galloway D. L.
,
Alley W. M.
et al.
The purpose of this report is to describe the role of science in support of emerging issues and practices in the management of ground-water resources. Seven case studies are presented to demonstrate how datacollection networks, ground-water resource assessments, ...
Filed under:
Geology -
Hydrogeology
Reference:
U.S. Geological Survey Circular 1247, 73 p
This Circular describes the occurrence and flow of freshwater and saltwater in ground-water systems of the Atlantic coastal zone reviews the causes, modes, and management of saltwater intrusion along the Atlantic coast and illustrates some of the mechanisms ...
Filed under:
Geology -
Hydrogeology
Reference:
U.S. Geological Survey Circular 1262, 113 p
Focazio M. J.
,
Reilly T. E.
et al.
This report provides an overview of some of the common approaches used to scientifically determine the important factors controlling the vulnerability of ground-water resources to contamination.
Filed under:
Geology -
Hydrogeology
Reference:
U.S. Geological Survey Circular 1224, 33 p
<p>Currently, there are an estimated 300 referable dams in Queensland. These dams fulfil an important role in our society including water supply, hydroelectric power generation, process water management, flood control, sediment and water control and recreation. ...
Filed under:
Dam Engineering -
Dam Management
Reference:
The State of Queensland (Department of Natural Resources and Mines) 2002
The intent of the Standards is to identify common minimum evaluation and mitigation measures for all Federal departments and agencies and to ensure that all federal entities have a balanced, agency-conceived and controlled seimic safety program for their existing ...
Filed under:
Earthquake Engineering -
Seismic Mitigation and Design
Reference:
ICSSC RP 6 NISTIR 6762
This manual was developed to assist and encourage the many owners of small dams in Connecticut to inspect and maintain their dams on a regular basis. It is intended to be a useful guide for owners to refer to while performing these activities. By inspecting ...
Filed under:
Dam Engineering -
Dam Management
Reference:
Connecticut Department of Environmental Protection, Arthur J. Rocque, Jr. Commissioner