Home
|
About
|
Blog
|
Contact us
|
News
|
Links
[
Log On or Register
]
Toggle navigation
Publications
Software
Equipment
SEARCH
Your single point of reference for all your Geotechnical Inquiries
Error Messages go here
Publications
Codes and Standards
Dam Engineering
Earthquake Engineering
Engineering Geology
Environmental Geoengineering
Geology
Geotechnical Professional Practice
Management & Scheduling
Mining Engineering
Mine Design
Mine Monitoring
Mine Numerical Analysis
Mine Risk Assessment
Mine Rock Behavior - Classification
Mine Rock Support
Mine Slope Stability
Surface Mining
Underground Mining
Pavement
Rock Mechanics
Soil Mechanics
Statistics & Reliability
Tunnel Engineering
Publications in
Mine Design
Total Items found:
19
A PROPOSAL OF OPEN PIT COAL MINE AT THE NORTHERN PART OF BARAPUKURIA COALFIELD, DINAJPUR, BANGLADESH (2014)
Quamruzzaman C.
,
Mondol Md. A. M.
et al.
<p>The Barapukuria Coalfield is only production coalfield in Bangladesh with coal deposit area of approximately 6.25 km2. Geologically, the coal basin is a singular syncline in which coal occurs at shallower depth at the northern part and deeper depth at the ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
International Journal of Emerging Technology and Advanced Engineering, Volume 4, Issue 3, March 2014
DESIGN OF OPTIMUM SLOPES FOR SAFETY AND CONSERVATION IN OPENCAST MINES – AN APPRAISAL (2011)
Jayanthu S.
,
Reddy C. V.
<p>Presently, due to ever-increasing demand of minerals for the country, it is very much required to have the opencast mines at a greater depth. Increasing depth also increased the severity of slope stability problems of the opencast mines. Unlike the previous ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
Golden Jubilee celebration & MineTECH'11 of The Indian Mining & Engineering Journal' held at Hotel Babylon Inn 18-19 Nov 2011 Raipur
ANALYSIS AND DESIGN OF SLOPES FORRAJO SUR, AN OPEN PIT MINE NEXT TO THE SUBSIDENCE CRATER OF EL TENIENTE MINE IN CHILE (2009)
Hormazabal E.
,
Rovira F.
et al.
This paper provides a general description of thegeotechnical study carried out for Rajo Sur project, including geological and geotechnical characterizations of the site, slope stabilityanalyses, particularly insectors next to the subsidence crater, and proposed ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
Slope Stability Santiago Chile, November 2009
ENGINEERING AND DESIGN MANUAL COAL REFUSE DISPOSAL FACILITIES (2009)
<p>The Manual represents guidance for designers, coal operators, and regulators to meet the requirements of 30 C.F.R. 77.216(a) in designing, constructing, and maintaining dams at coal mines. The guidance provides information and suggested methods and procedures ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
U. S. Department of Labor Mine Safety and Health Administration, Second Edition, 2009
FLOWSHEET DEVELOPMENT FOR THE SUKARI GOLD PROJECT IN EGYPT (2009)
Rhodes M.
,
Penna F.
<p>The Sukari project, which is owned by Centamin Egypt Ltd, is located in southern Egypt, 770 km south of Cairo but close to the Red Sea. The project is the first new gold development in Egypt and was commissioned in the middle of 2009.<br />In 2007, Centamin ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
World Gold Conference 2009, The Southern African Institute of Mining and Metallurgy, 2009
IT IS BETTER TO BE APPROXIMATELY RIGHT THAN PRECISELY WRONG - WHY SIMPLE MODELS WORK IN MINING GEOMECHANICS (2009)
Hammah R. E.
,
Curran J. H.
<p>The paper argues that, due to challenges such as large uncertainty and presence of ill-posed problems, simple models are well suited to mining geomechanics. It builds its case by defining what models are, outlining the usefulness of simple models, and explaining ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
43rd US Rock Mechanics Symposium and 4th U.S.-Canada Rock Mechanics Symposium, held in Asheville, NC June 28th - July 1, 2009
PERIMETER CONTROL AT ORAPA DIAMOND MINE (2008)
Oageng K.
,
Joseph R. O.
et al.
This paper presents results of a project undertaken to monitor, review and optimize the trim blasting and pre-splitting processes at Orapa Diamond Mine in Botswana. The project was specifically incepted to improve the final wall conditions, which continued ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
The Southern African Institute of Mining and Metallurgy Surface Mining 2008
THE APPLICATION OF MULTI-PARAMETRIC BLOCK MODELS TO THE MINING PROCESS (2007)
Bye A. R.
A 3D multi-parameter model has application for any major mining venture that requires a detailed understanding of the variability in rock mass conditions. These models give engineers a tool whereby they can assess the spatial variability of the rock mass information ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
The Journal of The Southern African Institute of Mining and Metallurgy VOLUME 107 REFEREED PAPER JANUARY 2007
MINE SHAFT AND ADIT CLOSING (2005)
Closure of underground mine openings by filling, plugging, capping, installing barriers, gating or fencing.
Filed under:
Mining Engineering
-
Mine Design
Reference:
CODE 457, NATURAL RESOURCES CONSERVATION SERVICE CONSERVATION PRACTICE STANDARD
STABILITY ASSESSMENT AND SLOPE DESIGN AT SANDSLOOT OPEN PIT, SOUTH AFRICA (2001)
Bye A. R.
,
Bell F. G.
Sandsloot open pit is located on the northern limb of the Bushveld Igneous Complex. It is the largest open pit platinum mine in the world. Three major joint sets have been recognized at Sandsloot, which are related to the regional tectonic history. They have ...
Filed under:
Mining Engineering
-
Mine Design
Reference:
International Journal of Rock Mechanics & Mining Sciences 38 (2001)
This site uses cookies. Read about our
Cookie Policy
I understand.