Your single point of reference for all your Geotechnical Inquiries

Software tagged with [bearing capacity]

Total Items found:
AXILTR
Software by  vulcanhammer  
<p>Program AXILTR, AXIal Load-TRansfeR, consists of a main routine and two subroutines. The main routine feeds in the input data, calculates the effective overburden stress, and determines whether the load is axial down-directed, pullout, or if uplift/downdrag ...
Bearing capacity and settlments – Loadcap
Software by  GeoStru Software  
<p>Software for the computation of bearing capacity on loose or rocky soils, according Terzaghi, Meyerhof, Hansen, Vesic, Brinch-Hansen, Richards et. Al, Meyerhof and Hanna (1978) and computation of bearing capacity factors. Settlements: Elastic (Timoshenko ...
CBR
<p>This program reduces the data from California Bearing Ratio (CBR) tests, calculates CBR values and plots reports featuring stress vs. penetration, CBR vs. density and swell vs. time charts.</p>
Ce.Ca.P.
Software by  geo&soft international  
<p>Ce.Ca.P. is a complete package for the analysis and design of foundations; because of its completness, flexibility ad user-friendliness it is a fundamental instrument for any kind of geothecnical project. <br />To calculate the bearing capacity of foundations, ...
Clisp Studio CBR Software Module
Software by  VJ Tech  
<p>he VJ Tech Clisp Studio CBR Software module enables the User to perform California Bearing Ratio tests to evaluate the load-bearing capacity of soils used for building roads. . The software is ideally used with the VJ Tech Triplex II Advanced frame (which ...
EgjeSoft BearCap
Software by  EgjeSoft  
<p>Features of EjgeSoft BearCap&copy;<br />- Both types of factor of safety (Load and shear strength) can be used,<br />- Eccentric and inclined loadings are considered,<br />- Variable GWT level, different side and foundation soils,<br />- Terzaghi, Meyerhof, ...
GEO5 - Spread Footing
Software by  Fine Civil Engineering  
<p>This program is used for the design of spread footings subject to general load. It computes vertical and horizontal bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear reinforcement (punching).</p>
GEO5 Anti-Slide Pile
Software by  Fine Civil Engineering  
<p>This program is used for design of pile walls stabilizing slope movement or increasing safety factor of the slope. The first analysis should be done in the Slope Stability program, where the active and passive forces acting on pile wall are computed. Next, ...
GEO5 Spread Footing
Software by  Fine Civil Engineering  
<p>This program for the design of spread footings subject to general loading. It computes bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear reinforcement.</p>
GEO5 Spread Footing CPT
Software by  Fine Civil Engineering  
<p>The program Spread Footing CPT is used for the design and verification of spread footing foundations based on data from field tests (CPT, SPT). The program performs an analysis for vertical bearing capacity, settlement and longitudinal and shear reinforcement ...