Your single point of reference for all your Geotechnical Inquiries
Error Messages go here
Software tagged with [footing foundation]
Total Items found:
<p>Analysis of bearing capacity acc. to Eurocode 7 (DIN EN 1997-1 with DIN 1054:2010, OENORM B 1997-1-1, NF EN 1997-1, BS EN 1997-1, UNI EN 1997-1 with NTC 2008, UNE EN 1997-1 with DB SE-C and free settings) / DIN 4017 / DIN 1054:2005 / SIA 267 / OENORM B ...
<p>Analysis of footings (rectangular, strip, circular footings) with all foundation engineering checks and optimization acc. to Eurocode 7 / DIN 1054:2010 and 2005 / SIA 267</p>
<p>This program is used for the design of spread footings subject to general load. It computes vertical and horizontal bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear reinforcement (punching).</p>
<p>This program for the design of spread footings subject to general loading. It computes bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear reinforcement.</p>
<p>The program Spread Footing CPT is used for the design and verification of spread footing foundations based on data from field tests (CPT, SPT). The program performs an analysis for vertical bearing capacity, settlement and longitudinal and shear reinforcement ...
The GGU-SETTLE program allows the calculation of foundation settlement using rectangular or triangular foundations, including mutual influence. The stress distribution at the base of the foundation can change in a linear manner in all directions.