Your single point of reference for all your Geotechnical Inquiries

Publications tagged with [support]

Total Items found:
AN ANALYSIS OF FLEXURAL STRENGTH AND CRACK WIDTH FOR FIBER-REINFORCED SHOTCRETE USED IN WEAK ROCK MINES (2011)
<p>To quantify the support provided by the shotcrete, flexural strength tests were conducted with two common, commercially available fiber-reinforced shotcrete (FRS) mixes using the round determinant panel (RDP) test method, ASTM C 1550. A portable RDP test ...
Reference: Trans Soc Min Metal Explor TP-09-062, 2011 Jan
AN ANALYSIS OF FIBER-REINFORCED ROUND PANEL STRENGTHS AND COMPARISON TO WIRE MESH BAG STRENGTH (2010)
Researchers at National Institute for Occupational Safety and Health (NIOSH) are investigating how fiber-reinforced shotcrete mix designs can be extrapolated from proven designs employing wire mesh. This paper explains the results of round determinate panel ...
Reference: 2010 SME Annual Meeting and Exhibit, February 28 - March 3, Phoenix, Arizona
WHAT HAPPENED TO THE MECHANICS IN ROCK MECHANICS AND THE GEOLOGY IN ENGINEERING GEOLOGY (2008)
This paper questions the application of rock mass classification systems in engineering geology problems.
Reference: SAIMM, SANIRE and ISRM 6 th International Symposium on Ground Support in Mining and Civil Engineering Construction
LIMITATIONS OF ROCK MASS CLASSIFICATION SYSTEMS FOR TUNNEL SUPPORT DESIGNS (2007)
This paper presents the view that rock mass classification systems are not enough for final design, from experience with major tunnels and cavern projects in the Sydney region.
Reference: Tunnels & Tunnelling International | April 1, 2007 | Pells, P.J.N.; Bertuzzi, R.
NOTES ON THE PREPARATION OF GEOTECHNICAL MODELS FOR UNDERGROUND WORKS (1994)
The design of underground structures and the role of geology and engineering geology is presented.
Reference:
ROCK MECHANICS AND ENGINEERING GEOLOGY IN THE DESIGN OF UNDERGROUND WORKS (1994)
The design of underground structures and the role of geology and engineering geology is presented.
Reference: Australian Geomechanics, April 1994
JET GROUTING TO CONSTRUCT A SOILCRETE WALL USING A TWIN STEM SYSTEM (1989)
This paper presents analysis for data obtained from the extensive project test program, verification section and production work of twin stem jet grouting system.
Reference: ASCE Geotechnical and Construction Division Special Conference, 1989